DRILL HIGHLIGHTS:
Drill hole 17 contained 43.66 metres (143.24 feet) of 0.34 g/t silver and 1.76 g/t gold. including 1.5 metres (4.92 feet) of 19.5 g/t gold.
This hole extends the known mineralization approximately 60 metres down-dip from the previous drilling.
Drill hole 22 contained 15.45 metres (50.68 feet) of 0.96% copper and 11.5 metres (37.73 feet) of 1.1% copper.
This important hole broadens the mineralized zone approximately 30 metres to the west of known mineralization.
Kennecott has an additional 5 holes presently at
A 3D model showing hole MAD0017, MAD0022 and the previously announced MAD0021 along with the additional 5 pending holes can be found at the link below:
https://americanpacific.ca/projects/madison/madison-drill-holes-17-18-and-21/
'The interval in MADN0017 contained strongly anomalous gold values with several higher-grade intercepts including 1.5 metres of 19.50 grams/ton, 6.17 metres at 7.36 grams/ton and 18.28 metres at 3.69 grams/ton with lower grade intervals in between. This indicates multiple mineralized structures in this portion of the system and that is a good thing. This drill hole intercept is approximately 60 meters from the known high-grade mineralization. The 15.45-metre interval of 0.96% copper in drill hole MADN0022 is also an impressive run and most importantly broadens the mineralization 30 meters to the west. This apparent flattening and broadening may be due to stratigraphic controls that remain untested and open along strike.' States
Quality Assurance, Quality Control
Sample Security
The following measures were taken to ensure sample security: samples were submitted to the ALS Global lab by the company personnel following the guidelines and procedures of Kennecott; only authorised personnel have attended the samples; core was logged at the
Analysis Suite
The samples were analysed by ALS Global using standard assay methods: ME-MS61L ultratrace four acid digest ICP-MS method for 49 elements plus Au-Pt-Pd. Note Au, Pt & Pd determinations by this method are semi-quantitative due to the small sample weight used (0.25g). Au-ICP21 and Au-GRV21 fire assay for gold using a 30g charge, and gold-rich samples re-analyzed by Au-GRV22 using a 50g charge. Six resistate elements plus Si were analyzed by certified pXRF and VNIR/SWIR spectra were collected on each sample.
Audits or reviews
The results of any audits or reviews of sampling techniques and data were reviewed by Kennecott personnel. Internal review of the drilling results by the Company's management is routinely used through the course of the project.
Standards, Blanks and Duplicates
Two certified reference materials were used as standards for QA/QC and were obtained from OREAS based in
Qualified Person
Technical aspects of this press release have been reviewed and approved by
About
On Behalf of the Board of
'Warwick Smith'
CEO & Director
Corporate Office:
Suite 910 - 510 Burrard Street
V6C 3A8
Contact:
President,
604.908.1695
Kristina@americanpacific.ca
The CSE has neither approved nor disapproved the contents of this news release. Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the CSE) accepts responsibility for the adequacy or accuracy of this release.
(C) 2021 Electronic News Publishing, source