Manitowoc : launches two new Potain luffing jib cranes
April 05, 2024 at 09:53 am
Share
Manitowoc is introducing two new luffing jib crane models, the MR 309 and MR 329, which come in 16 t or 25 t maximum capacity variants.
While both cranes share a 60 m jib and 3.4 t capacity at the tip, they have different load curves and heights under pivot thanks to the respective 2 m and 2.45 m pivot and mast configurations.
The new generation responds to customer feedback for simpler and quicker erection, a greater height under pivot, more powerful load charts, and a smaller out of service radius (minimum 9.5 m up to 12 m).
The new cranes also come equipped with the latest Potain Crane Control System (CCS) for faster setup and unparalleled control, as well as the new Potain CONNECT telematics for optimized fleet management and uptime.
Manitowoc completes its latest generation of Potain luffing jib cranes with the launch of the MR 309 and MR 329. These new models follow the successful introduction of the MR 229 at bauma 2022, which was the first Potain luffing jib crane to come equipped with the cutting-edge Potain Crane Control System (CCS) and Potain CONNECT telematics. The entire new generation of cranes reflects Manitowoc's commitment to exceeding the latest standards and incorporating valuable customer feedback gathered through its Voice of the Customer process.
Customers demanded quicker and simpler crane assembly and Manitowoc listened. The jib on the MR 229, MR 309, and MR 329 can be mounted horizontally, section by section, while the reduced windvane spans make installation on tight jobsites easier. Accessible platforms and steps promote secure and efficient worker movement, and the counterjib ballast is installed at working height. The positioning of the ballast is made easier thanks to slinging rings and a self-centering system. A redesigned luffing mechanism further streamlines assembly, while an integrated jib-end basket further promotes more secure installation, inspection, and maintenance. Finally, the Potain CCS decreases commissioning time, helping the cranes to get to work faster.
Attachments
Original Link
Permalink
Disclaimer
Manitowoc Company Inc. published this content on
05 April 2024 and is solely responsible for the information contained therein. Distributed by
Public, unedited and unaltered, on
05 April 2024 08:52:08 UTC.
The Manitowoc Company, Inc. is a provider of engineered lifting solutions. The Company, through its wholly owned subsidiaries, designs, manufactures, markets, distributes, and supports comprehensive product lines of mobile hydraulic cranes, lattice-boom crawler cranes, boom trucks, and tower cranes under the Aspen Equipment, Grove, Manitowoc, MGX Equipment Services, National Crane, Potain, and Shuttlelift brand names. Its segments include Americas segment, Europe and Africa (EURAF) segment and Middle East and Asia Pacific (MEAP) segment. The Americas segment includes the North America and South America continents. The EURAF segment includes the Europe and Africa continents, excluding the Middle East region. The MEAP segment includes the Asia and Australia continents and the Middle East region. Its crane products are used in a variety of applications throughout the world, including energy production/distribution and utility, petrochemical and industrial, and infrastructure.