Roscan Gold Corporation announced positive results from an additional 2 Air Core (AC) and 14 Reverse Circulation ("RC") and Diamond Drilling ("DD") holes totaling 2,456 meters (m) at Southern Mankouke Zone (MS3 targets). MS3 shows potential of a high-grade extension to the East and South, open at depth and to the North and South. The company also begun to receive assay results from the 9,000m RC and 2,500m DD drill campaign on the Mankouke South (MS1) and Kandiole resources targets, which was concluded the end of December 2021 with those results pending assays.

These results are in addition to the outstanding pre-rainy season results, which have identified new anomalous targets coincident with completed interpretation of the Versatile Time-domain Electromagnetic System ("VTEM") geophysical survey. Such interpretation points to the expansion of previously known regional footprint and potential for significant resource growth beyond the current footprint of existing discoveries. Drilling Highlights: Mankouke Discovery Zone (MS3): 16.01 gpt gold over 8m from drill hole DDMAN21-118 from 54m; Including 26.66 gpt gold over 4m from 54m; 11.88 gpt gold over 6 m from drill hole RCMan21-0058 from 19m; Including 48.27 gpt gold over 1m, from 20m; 8.89 gpt gold over 4m from drill hole RCDDMan21-123 from 175.5m; 3.29 gpt gold over 10m from drill hole RCMan21-0056 from 18m Including 8.01 gpt gold over 1m from 19m and 11.76 gpt gold over 1m from 24m; 2.85 gpt gold over 8m from drill hole RCDDMan21-122 from 41m Including 4.5 gpt gold over 5m from 41m; 7.61 gpt gold over 2m from 194.4m.

Mankouke Discovery Zone (MS3) - Potential High-Grade Extension to the East and South: At the MS3 Discovery Zone, RCDDMan21-118 with 16.01 gpt gold over 8m from 54m and RCDDMan21-122 and 123 with 2.85 gpt gold over 8m from 41m and 8.89 gpt gold over 4m from 175.5m indicate the potential for a high-grade mineralization extension to the East and the South. The gold mineralization trend is now recognized over 250 meters north to south and over 150 meters vertical depth, ending in fresh rock. Additional follow-up drilling has been completed and results are pending.

Drilling and Analytical Protocol: Roscan uses Reverse Circulation (RC) to drill until 120-150m and continue if it is necessary with a Diamond (DDH) type of drilling to reach the target. For this campaign, Geodrill drilled mainly the RC portion of the holes and Foraco the core to reach the target depth. The samples are sent for preparation to the ALS Laboratories in Bamako, Mali and assayed at their analytical facilities to Ouagadougou for 1 kg Bottle Roll with atomic absorption finish including tail analysis for results more than 0.05ppm.