OD6 Metals Limited (OD6 or the Company) advised that an airborne electromagnetic survey has commenced at both its Splinter Rock and Grass Patch Projects in the Esperance region of Western Australia. Both Projects are considered prospective for clay hosted rare earth elements (REEs). Survey aims to identify and map clay locations, expanse, depth and thickness Over 4,600 km2 of tenement area to be surveyed 13,450 line km electromagnetic survey to be flown at 400m spacings This will enable future targeted drilling of high priority exploration areas Survey to be completed during October with analysis of data to be completed in Fourth Quarter 2022 The Airborne Electromagnetic Survey will be flown across both the Splinter Rock Project and Grass Patch Project, which are located to the north and northeast of Esperance, Western Australia.

The survey, to be undertaken by Xcalibur Multiphysics, will use the Tempest airborne electromagnetic (AEM) survey system. AEM surveys map the electrical conductivity of the subsurface. The system consists of a transmitter loop fitted to a fixed wing aircraft, with a receiver bird that is towed along behind the aircraft.

As the aircraft flies along a pre-determined flight path, the system transmits a signal into the ground with the receiver then measuring the response of the returned signal. This recorded information maps the conductivity of the subsurface, which can be modelled to infer clay thickness. The survey will be flown at 400m spacing and will total 13,450 line km.

Resulting Tempest Electromagnetic data can be used to map the electrical conductivity of rocks and soils below ground. Where electrical conductivity is high, it can indicate rock layers containing salt water or those which are clay rich or contain sulphide mineralisation. Where electrical conductivity is low, it can indicate zones of non-conductive rock, sand or fresh water.

The key outcome of the survey is to identify and map clay locations, expanse, depth and thickness across OD6's current tenement areas. The mapping of clays will then enable targeted drilling of high priority exploration areas over the next 6 to 18 months. Completion of the airborne electromagnetic survey is currently scheduled for late October 2022.

Analysis of the data will be completed during Fourth Quarter 2022.