The Board of Directors of Lovitt Resources Inc. announced that an area in its wholly owned Lovitt mine, 250 ft. from the 1250 portal, has returned an average assay of 0.33 oz. per ton gold and 0.82 oz/ton silver (11.2 gm/t Au and 28.3 gm/t Ag) in a 226 lb sample taken from multiple sample points in four tons of ore at the end of a 20 X 20 foot drift. It is apparent from historic data produced by Lovitt Mines, Cyprus Anvil, Newmont Mining Corp. and Asamera Minerals (US) Inc., that this drift was the original control point in developing the #3 Stope area. The area of interest is adjacent to the West Strand Fault which controlled gold deposition in the south third of the mine, a distance of about 1,000 feet. The historic maps and engineered sections estimate the dimensions of Stope 3 to be approximately 100 feet long, 80 feet wide and 170 feet in depth. It appears that internal movement has occurred over 45 years to fill the stope to an extent than can only be determined by diamond drilling. The company has returned its mine status to active to extract a 500 ton bulk sample, to test the feasibility of trucking ore to a yet to be determined custom milling facility within a 200 mile radius of the mine in central WA. A sampling program will be implemented to ensure that grade of the material shipped of 500 tons, or less, is commercial. An NSR royalty of 5% on ore sales is payable to minority shareholders whose 42.2% equity interest was bought out in 2005. The company recently announced its intention to drill the permitted Matthews property, about 1 miles to the southeast on the Wenatchee Gold Belt. In view of finding a possible source of commercial ore within the mine, the Directors have decided to extract the sample, then conduct limited diamond drill exploration within the mine to better define this new resource. The company fully intends to drill Matthews as originally planned as soon as funds and resources allow.