Lode-Star Mining Inc. announced that with the advancement of the previous items on cruise control, the Company is now focusing on both surface and, if proven necessary, underground drilling. The company is in the planning stage and should have targeting completed by the end of June. The Company has engaged Titan Drilling out of Elko, NV to commence a modest drill program early July 2020. The plan will be to drill approximately twelve holes at a rate of two to three holes per month. This conservative drilling rate will give time to assay each hole before methodically drill the next. The objective is to understand the geometry of this gold bearing zone and indentify additional cross cutting features. The immediate target area, as described in most recent NI 43-101 dated January 15, 2020 (Authored by Mr. Robert M. Hatch) is the high-grade area referred to as the Church Vein Zone. This zone measures up to 40 feet in width and trends at least 600 feet north-northeasterly, immediately west of the Church shaft. Drilling by ICN in 2011 included 19 core holes with varying results. Some holes didn't hit the intended target and will be redrilled accordingly to better test the target. As drilling progressed into the vein area marginal gold was identified. Three holes, ICN-003, ICN-013 and ICN-014 (results below) hit solid high- grade intercepts needing further drilling to define. Hole ICN-003: included 9.5 ft (2.90 m) weighted averaged assays of 40.79 oz/ton (1398.6 g/t) gold. Hole ICN-013: included 4.5 ft (1.37 m) with 51.46 oz/ton (1764.2 g/t) gold. Hole ICN-014: included 3.5 ft (1.00 m) with 68.02 oz/ton (2332.0 g/t) gold.