Japan Aviation Electronics Industry : Automotive USB 3.0 / Automotive High-speed Transmission Connector MX62 Series
September 15, 2015 at 09:16 am
Share
From the point of increase of the data along with the growing high performance and entertainment, recently, the applications considering USB 3.0 have been increasing for automotive applications.
To meet these needs, JAE has developed MX62 Series connector to comply with USB 3.0 for automotive applications.
The MX62 Series is a connector compatible with USB3.0 transmission specifications, designed to satisfy 5Gbps high-speed; achieving both mechanical and environmental performances for requirements used for automotive applications.
Also it adopts shielded wires exclusively developed for automotive applications.
The MX62 Series is not only suitable for automotive, but also a wide range of industrial applications as it has heat, shock and vibration resistance.
1.
No. of Contacts
: 10 pos.
2.
Operating Temperature
: -40 Deg. C to +85 Deg. C
3.
Contact Resistance
: 8m ohms max. (initial)
4.
Insulation Resistance
: 100 M ohms min. (when mated)
5.
Rated Current
: 2.2A (power / GND line)
6.
Dielectric Withstanding Voltage
: AC 1,000V (applied for 1 minute when mated)
7.
Applicable Board
: 1.6 mm
8.
Applicable Wire
: Shielded Twist Pair Cable (Sold only as a harness product)
:: Materials and Finishes
Right Angle Pin Connector
Component
Material / Finish
Outer Housing
PPS-GF40
Inner Housing
LCP-GF35
Terminal
Brass / Contact area Au plating
Connection area Sn plating
Japan Aviation Electronics Industry, Limited is a Japan-based company mainly engaged in the manufacture and sale of connectors, interface solution equipment and others, as well as the purchase and sale of the other related equipment and parts. The Company operates through three business segments. The Connector segment is involved in the manufacture and sale of various connectors for use in mobile devices, automobiles, industrial machinery and infrastructure, among others. The Interface Solutions segment is involved in the manufacture and sale of automotive products, industrial machinery and infrastructure products. The Aircraft segment is involved in the production of flight control equipment, inertial navigation equipment, defense and space electronic equipment, drive equipment and sensor packages, as well as the manufacture and sale of aircraft and infrastructure and automotive products. The Company is also involved in the sale of other goods and the service business.
JAPAN AVIATION ELECTRONICS INDUSTRY, LIMITED 
