ANDRITZ : to deliver complete folding box board production line to KAMA Karton LLC in Krasnokamsk, Perm Region, Russia

The board machine has an annual capacity of 220,000 tons and is complemented by a new wood handling line, a BCTMP plant with HC bleaching, as well as stock preparation, approach flow, broke, and fiber recovery systems. ANDRITZ will also deliver the Motor Control Center, the Multi Motor Drive and a complete PrimeControl system for the entire line. The line is scheduled to be started up during the first quarter of 2019.

The new wood handling line for aspen will be added to an existing line for birch and is designed for a debarking capacity of 80m sob/h. It encompasses a Rotabarker debarking line, an HHQ Chipper with a capacity of 70m sub/h, chip screening and a chip silo reclaimer, chip conveyors to BCTMP, a bark line and bark feeding to existing bark conveyors, as well as further transportation to the existing bark and waste handling system.

The new BCTMP line with a design capacity of 360 admt/d contains chip washing, pre-steaming and impregnation units, two high-consistency refining stages, bleaching, washing, screening and reject treatment equipment, a disc filter for thickening purposes, and a storage tower. The stock preparation system handles NBKP and LBKP fibers in two lines and includes two ANDRITZ FiberSolve FSV pulpers, cleaning with two AhlCleaners, and eight ANDRITZ TwinFlo low-consistency disc refiners. The approach flow system is designed for three layers. Broke and fiber recovery systems round off the stock preparation and approach flow systems.

The board machine has three PrimeForm Fourdrinier layers - one containing a PrimeForm HB hybrid former with a wire width of 4,200 mm - and will operate at a design speed of 800 m/min. The press section consists of two PrimePress X shoe presses and one smoothing press. The pre-drying section contains steel drying cylinders and is followed by a PrimeCoat film press with a post-drying section, also equipped with steel drying cylinders. The machine is complemented by two PrimeCal calenders (one hard nip, one soft nip) and a coating section with the latest PrimeCoat roll coating heads technology, as well as a PrimeReel pope reeler and a slitter rewinder at the end.

The entire production line will be equipped with an ANDRITZ PrimeControl system that is aligned to the specific needs of paper machines. It includes extended features for process automation throughout the paper mill and minimizes the number of subsystems and associated interfaces. The advanced Multi Motor Drive system will complement the automation system and ensure reduced energy and power consumption.

Delivery will be handled on an EPS basis, where ANDRITZ provides advisory services relating to installation, commissioning, and training. KAMA will perform the civil and installation work.

- End -

For further information, please contact:
Michael Buchbauer
Head of Corporate Communications
[e-mail]

The ANDRITZ GROUP
ANDRITZ is a globally leading supplier of plants, equipment, and services for hydropower stations, the pulp and paper industry, the metalworking and steel industries, and for solid/liquid separation in the municipal and industrial sectors. The publicly listed technology Group is headquartered in Graz, Austria, and has a staff of approximately 25,500 employees. ANDRITZ operates over 250 sites worldwide.

ANDRITZ PULP & PAPER
ANDRITZ PULP & PAPER is a leading global supplier of equipment, systems, and services for the production and processing of all types of pulps, paper, tissue, and cardboard. The technologies cover processing of logs, annual fibers, and waste paper; production of chemical pulp, mechanical pulp, and recycled fibers, recovery and reuse of chemicals, preparation of paper machine furnish; the production of paper, tissue, and board; calendering and coating of paper; as well as treatment of reject materials and sludge. The service range includes modernization, rebuilds, spare and wear parts, service and maintenance, as well as machine transfer and second-hand equipment. Biomass, steam, and recovery boilers, as well as gasification plants for power generation, flue gas cleaning plants, plants for the production of nonwovens, dissolving pulp, and panelboards (MDF) as well as recycling plants are also allocated to the business area.

2017-01-19

» back