Further to its exploration update of 23 January 2017, Millennium Minerals Limited announced that its near-mine exploration strategy at the Nullagine Gold Project (Nullagine or Project) in WA's Pilbara region has delivered additional strong results, highlighting the potential for resource growth across three mining centres. While the recent announcement focused on newly discovered areas at the Middle Creek and Camel Creek Mining Centres, which will be the focus of resource drilling in 2017, this announcement reports on highly encouraging new results from in-fill and follow-up drill programs from three deposits within the Five-Mile, Golden Gate and Golden Eagle Mining Centres. Results from these drilling programs have yet to be incorporated into the Company's Mineral Resource and Ore Reserve statements, which demonstrated that Ore Reserves had already increased by 16% to 184,300 oz and Mineral Resources had risen by 12% to 1.2 M oz. Importantly, around 75% of the 1.2 M oz Mineral Resource is in the Measured and Indicated category. As results are received on individual deposits, the new drilling will progressively enable updated Mineral Resource estimates to be calculated and included in the Company's Mineral Resource and Ore Reserve inventories. Some of the drilling results reported in this announcement will be included in the annual Mineral Resource update (due to be released in February 2017), with others to be included in subsequent updates. Millennium Chief Executive Glenn Dovaston said the latest results continued to highlight the success of the Company's aggressive exploration strategy at Nullagine. Majuba Hill is located ~1 km south-south-west of the Anne de Vidia deposit and approximately 10 km from the processing plant. Mineralisation occurs on both north-east and north- north-east trending quartz veins dipping moderately steeply to the north-west. Majuba Hill had been previously defined by historical workings, rock chip samples and limited RAB drilling before the Company completed two initial RC drilling programs during 2016. These drilling programs delivered an initial maiden Mineral Resource of 31.5 koz Au and an initial Ore Reserve of 15.7 koz Au. Further drilling to test for parallel mineralised structures and extensions to the known mineralisation was carried out during the 2016 December Quarter and again returned highly encouraging results. Significant results returned thus far include: 9 m @ 8.15 g/t Au from 0 m including 1 m @ 60.4 g/t Au (FMX1314); 9 m @ 4.98 g/t Au from 29 m including 6 m @ 6.79 g/t Au (FMX1267); 10 m @ 2.28 g/t Au from 37 m (FMX1331) including 1 m @ 10.40 g/t Au (FMX1331); 10 m @ 1.36 g/t Au from 36 m (FMX1323); 7 m @ 1.71 g/t Au from 27 m including 1 m @ 8.84 g/t Au (FMX1318); 4 m @ 1.34 g/t Au from 35 m (FMX1312). The Condor prospect is located within the Golden Gate Mining Centre and approximately 36 km from the processing plant. Surface mapping conducted during 2016 identified at least three north-west striking and steeply north-east dipping quartz veins to the north-west of the existing Condor open pit. Only three sporadic RAB holes had been historically drilled to the north-west of the current pit and returned anomalous results. During the 2016 December Quarter, 29 RC holes were drilled to test for north-west extensions of the existing Condor mineralisation. This drilling returned significant results and further defined two new zones of mineralisation, both of which have two close-spaced parallel veins. Significant results from this drilling include: 6 m @ 8.45 g/t Au from 6 m including 3 m @ 14.48 g/t Au (CORD014); 19 m @ 3.14 g/t Au from 0 m including 3 m @ 13.84 g/t Au (CORD019); 10 m @ 6.56 g/t Au from 3 m including 4 m @ 15.09 g/t Au (CORD021); 5 m @ 10.92 g/t Au from 21 m including 2 m @ 24.72 g/t Au (CORD026); 3 m @ 14.97 g/t Au from 33 m (CORD030); 5 m @ 5.94 g/t Au from 36 m including 2 m @ 11.62 g/t Au (CORD015); 5 m @ 4.44 g/t Au from 13 m including 3 m @ 6.38 g/t Au (CORD035). Drill planning is underway to in-fill this newly defined mineralisation on a 20m x 20m drill spacing to establish a maiden Mineral Resource estimate for the Condor north-west mineralisation. In addition, drilling will also test for further extensions as well as parallel veins. This drilling is expected to be carried out in coming weeks. Agate is located approximately 4 km from the processing plant, adjacent to the existing haul road. This target was historically identified by soil sampling and followed up with RAB drilling which returned results such as 8 m @ 5.5 g/t Au and 4 m @ 8.67 g/t Au. Two subsequent RC drilling programs completed by the Company during the December Quarter have identified at least two zones of parallel mineralisation that returned economic intersections. Results include: 12 m @ 2.7 g/t Au from 45 m including 1 m @ 6.3 g/t Au, 1m @ 6.71 g/t Au and 1 m @ 8.81 g/t Au (OMX027); 11 m @ 2.27 g/t Au from 39 m including 4 m @ 5.24 g/t Au (OMX058); 13 m @ 1.67 g/t Au from 26 m including 2 m @ 5.45 g/t Au (OMX064); 9 m @ 1.72 g/t Au from 11 m including 1 m @ 5.06 g/t Au (OMX063); 9 m @ 1.24 g/t Au from 2 m (OMX060); 6 m @ 1.74 g/t Au from 25 m (OMX026); 5 m @ 2.96 g/t Au from 39 m including 1 m @ 9.66 g/t Au (OMX055); 5 m @ 1.90 g/t Au from 16 m (OMX061); 4 m @ 2.16 g/t Au from 25 m (OMX061). Based on these results, a maiden Mineral Resource estimate will be completed for Agate and this will be optimised to define a maiden Ore Reserve. Future drilling at the prospect will be dependent on the results of the optimisation study.